Bgt Advanced Precision Smart SDI12 Rockwool Cultivation Soil Substrate Moisture Temperature Ec Sensor Tester

• Customization: Available
• Installation Type: Surface or Buried Installation
• Sensing Type: Sense
• Model NO.: BGT-SEC(Z4)
• Contact: Contact
• Output Signal Type: SDI12,RS485
• Production Process: Injection
• Material: Plastic+Stainless Steel
• Measuring Medium: Soil ,Coco, Rockwool
• IP Rating: IP68
• Certification: CE
• Customized: Customized
• Name: Soil Temp Moisture Ec Sensor
• Power Supply: 3.6-16V/DC
• Power Consumption: Quiescent Current : 30ua
• Temp Range: -40~80°c
• Temp Resolution: 0.1°c
• Operating Temperature: -40~85°c
• Sensor Sealed: Epoxy Resin
• Installation: Surface or Buried Installation
• Cable Length: 5 Meters or Customize
• Dimension: 88*71*26mm
• Output Interface: SDI-12
• Transport Package: Carton Package
• Trademark: BGT
• Origin: China
• Production Capacity: 1000/Month

Product Description

 

Product Description

BGT CE SDI12 Rockwool Cocopeat Substrate Soil Moisture Temperature EC Sensor for Hydroponic and Green House

BGT-SEC(Z4) Soil Moisture, Temperature, and Electrical Conductivity (EC) sensor is an accurate tool for monitoring volumetric water content (VWC), temperature in soil and soilless substrates, and electrical conductivity. It sealed with resin packaged plastic body with sensing rods which can be insert directly into the soil or substrate with long time stability.
Furthermore, the sensor can equip with the air humidity and temperature sensor, which can measure ambient temperature, humidity, vapor pressure and vapor pressure deficit. Vapor pressure deficit is independent of temperature and is a more accurate measure to predict plant transpiration and water loss than relative humidity, this is very useful in greenhouse control to maintain a greater vapor pressure deficit (greater than 0.5 kPa) to allow plants to effectively transpire and prevent foliar diseases.
The sensor is applicable for science research, irrigation, greenhouse, smart agriculture etc

Features

• • Vapor Pressure Deficit, Air Humidity, Temperature measurement for greenhouse control
  • Digital sensor communicates over SDI-12 or RS485 serial interface
  • Supports SDI-12 or Modbus-RTU communications protocols
  • Low-input voltage requirements for power supply
  • Low-power design supports battery-operated data loggers
  • Low salinity sensitivity
  • Robust epoxy encapsulation resists corrosive environments
  • High accuracy with excellent stability
  • Reverse power protection and Built-in TVS/ESD protection

Product Parameters

Output Interface	Optional: SDI-12, V1.3 Optional: RS485, Modbus-RTU
Power Supply	3.9-28V/DC
Power Consumption	SDI-12: Quiescent Current : <30uA RS485: Quiescent Current : <4mA Measuring Current : <20mA during 150ms measurement
Substrate Moisture Measurement	Apparent dielectric permittivity: Range:1-81 (air - water), Resolution: 1-40.00: 0.1, 40.00-81.88: 0.5 Accuracy:1.00-40.00:+/-1,  40.00-81.00:+/-10% of Readings Volumetric Water Content (VWC): Range:0-100%, Resolution: 0.1% Accuracy: +/-3% The VWC range is dependent on the media the sensor is calibrated to. A custom calibration will accommodate the necessary ranges for most substrates.
Substrate EC Measurement	Range: 0-20ds/m; Resolution: 0.01ds/m; Accuracy: 0-7ds/m, 5%; 7-20ds/m, +/-10% of Readings Temperature compensation: 0-50°C
Substrate Temperature Measurement	Range: -40-80°C, Resolution:0.1°C, Accuracy:+/-0.5°C
Air Humidity	Range:0-100%, Resolution:0.1%, Typical Accuracy:+/-1.8% RH
Air Temperature	Range:-40-80°C, Resolution:0.1°C, Typical Accuracy: +/-0.2°C
IP Ratings	IP68 (No Air Humidity & Temperature & Vapor Pressure Deficit measurement) IP50 (With Air Humidity & Temperature & Vapor Pressure Deficit measurement)
Operating Temperature	-40-80°C
Sensor Sealed	Epoxy resin
Installation	Surface or buried installation
Cable Length	2 meters or Customize
Dimension	90*55*75mm

Detailed Photos

 

Installation Instructions

Company Profile

Packaging & Shipping