Bgt Accurate and Stable Global Shortwave Radiation Pyranometer Sensor for Weather Station

• Customization: Available
• Type: Diffuse Reflection Type Photoelectric Sensor
• Output Signal Type: 0~20mv,RS485 Modbus or 4-20mA
• Model NO.: BGT-TBQ(L-B)
• Production Process: Assemble
• Material: Plastic+Aluminum
• IP Rating: IP67
• Certification: CE
• Customized: Customized
• Name: Total Solar Irradiance Sensor
• Power Supply: 12-24V DC(4-20mA /RS485 Modbus)
• Response Time (95% Response): Bleow 10s
• Internal Resistance: Below 50Ω
• Temp Resolution: 0.1°c
• Operating Temperature: -40-+80ºC
• Daily Radiation Exposure Uncertainty: ±2%
• Installation: Surface or Buried Installation
• Cable Length: 3 Meters or Customize
• Weight: 0.8kgs
• Sensitivity Range: 7-14μV/(W/M²)
• Nonlinear: ±1%(100~1000 W/M²)
• Transport Package: Carton Package
• Trademark: BGT
• Origin: China
• Production Capacity: 1000/Moth

Product Description

 

Product Description

BGT CLASS B PV Monitoring solar radiation Detector Total Solar Irradiance Sensor for Photovoltaics Plants

TBQ total radiation sensor is a short-wave total radiation sensor used for solar radiation observation. It is a first-class total radiation sensor that complies with the latest ISO9060 and WMO technical standards.
TBQ total radiation sensor is used to measure the solar radiation received by the horizontal plane from a solid angle of 2π steradians (hemispheric direction). The unit is W/m². The TBQ total radiation sensor operates completely passively, using a thermopile sensor to generate an output voltage proportional to the incident radiation flux. Due to the use of two spherical glass covers, measurement errors, especially thermal offset, are reduced, so the sensor has high measurement accuracy.
The use of the TBQ total radiation sensor is very simple. You only need a high-precision voltmeter to read the measurement data. When calculating incident irradiance, the output voltage is divided by the sensitivity. Each sensor will provide corresponding sensitivity data when it leaves the factory. The TBQ total radiation sensor can be connected to most commonly used data acquisition systems. The TB total radiation sensor can be used for meteorological observations, building physics, climate and solar light collection experiments. A common application is as part of a weather station to measure outdoor solar radiation

Features

TBQ total radiation sensor uses the black coating on the sensor to absorb solar radiation. The radiation is converted into heat energy and enters the interior of the sensor, forming a temperature difference at both ends of the thermopile, thereby generating a voltage output signal proportional to the incident solar radiation.
 

Product Parameters

The TBQ series total radiation sensor is used to measure the solar radiation received by the horizontal plane from a solid angle of 2π steradians (hemispheric direction), in W/m2. The TBQ total radiation sensor adopts a completely passive working mode, using the black coating on the sensor surface to absorb incident solar radiation and convert it into heat energy, creating a temperature difference at both ends of the sensing device, thereby generating a radiation that is proportional to the amount of incident radiation. the output voltage. The main technical indicators of the TBQ total radiation sensor are as shown in Table 1:
 

ISO/WMO technical indicators	TBQ(L-B)
Classified according to ISO 9060/WMO standards	Class B /Good quality
Response time (95% response)	<10s
Internal resistance	<50Ω
Daily radiation exposure uncertainty	±2%
Zero offset: (a) Corresponds to 200W/m² net thermal radiation (ventilation)	<15W/m²
Zero offset: (b) Response corresponding to a 5K/h change in ambient temperature	<4W/m²
Stability (change/year, % of full scale)	±1.5%
Nonlinear	±1%(100~1000 W/m²)
Directional response	±20W/m²
Temperature response	<4%(-10~40ºC)
Tilt response	<2%
Sensitivity range	7-14μV/(W/m²)
Operating temperature	-40~+80ºC
Measuring range	0~2000W/m²
Cable replacement	Users can remove and install cables
Spectral range	280~3000 nm (50% transmission point)
Reading request	One differential voltage channel or one single-ended voltage channel
Horizontal calibration	Includes level bubble and adjustment feet
Calibration traceability	Traceability WRR, procedures are in accordance with ISO9847
Recommended calibration period	once every two years
Standard cable length	3m(default), other length on request
Weight (excluding cables)	0.8kg
Power Supply	DC12~24V
Output Signal	RS485, 4~20mA(DC12~24V) 0~20mV raw output(need not power supply)

Detailed Photos

Installation Instructions

 

 

Company Profile

Packaging & Shipping