Hight Quality Fdr RS485 SDI12 Uart Voltage Soil Temperature Moisture Probe Sensor for Environmental Soil Testing

• Customization: Available
• Installation Type: Surface or Buried Installation
• Sensing Type: Sense
• Model NO.: BGT-SEC
• Contact: Contact
• Output Signal Type: RS485 Modbus ,Voltage,SDI12
• Production Process: Injection
• Material: Plastic+Stainless Steel
• Measuring Medium: Soil
• IP Rating: IP68
• Certification: CE
• Customized: Customized
• Name: Soil Temp Moisture Ec Sensor
• Power Supply: DC2-5V; DC5-24V
• Temp Range: -40~85°c
• Temp Resolution: 0.01°c
• Operating Temperature: -40~85°c
• Sensor Sealed: Epoxy Resin
• Installation: Surface or Buried Installation
• Cable Length: 3.5 Meters or Customize
• Transport Package: Carton Package
• Trademark: BGT
• Origin: China
• Production Capacity: 1000/Moth

Product Description

 

Product Description

CE SDI12 output IP68 Waterproof Plant combined smart Soil Temp Moisture EC sensor for Agriculture
The new developed soil moisture temperature EC three-in-one sensor is a soil sensor developed with a new technical scheme, which can measure soil moisture, temperature and conductivity at the same time, and carry out compensation calculation among parameters, eliminating the influence of conductivity on water, temperature on water and temperature on conductivity, can perform compensation operation and accurate evaluation.
This product can be used to measure the moisture content of saline-alkali land, which is not affected by the salt content of soil and can accurately measure the moisture content of soil.
It adopts imported epoxy resin, high quality stainless steel, more resistance to acid and alkali corrosion, steel needle isolation, never electrolysis, with more than 3 years of service life.
With the multi-directional function of power line, ground line and signal line, can prevent the damage caused by reverse connection, wrong connection and so on.

Features

Working Voltage: DC2-5V; DC5-24V
Quiescent Current: peak value <30mA,Average<10mA
Response Time: <1s
Measured Stability Time: 2s
Output: Digital RS485/RS232 Modbus
Protection Level: IP68
Working Temperature range: -40ºC~85ºC
Measurement Area: center on the central probe in a cylinder with diameter 7cm and 10cm height
 

Product Parameters

Parameters of the category	Moisture	EC (Conductivity)	Temperature
Measuring range	0-100.00%	0-20000uS/cm (25ºC) (0-20.0EC)	-40.00ºC~85.00ºC
Unit	V/V %,Volumetric moisture content of soil	uS/cm, mS/cm	ºC centigrade degree
Resolution	0.01%	1 uS/cm	0.01ºC
Accuracy	±3%(0-53%);±5%(>53%)	2%FS, 2% of the value	Error < 0.3ºC(-10ºC~50ºC)others <0.6ºC
Swap precision	< 3%	< 2%FS	< 0.3ºC
Repetition measurement error	< 2%	< 2%FS	< 0.2ºC
Response time when powered	1s	1s	1s
Measured stability time	< 2s	< 2s	< 2s
Measurement principle	Frequency domain (FDR) add temperature and conductivity correction	EC measurement, with temperature compensation	RTD Thermal sensor, plus nonlinear correction

Detailed Photos

  

Installation Instructions

Company Profile

Packaging & Shipping