Indoor Greenhouse Weather Stationco2 Gas Controller Environmental Illuminance CO2 Temperature Humidity Sensor

• Customization: Available
• Installation Type: Wall-Mounted Type
• Sensing Type: Digital
• Model NO.: BGT-AWS(Y3)
• Contact: Contactless
• Output Signal Type: Digital/Analog
• Production Process: Normal Wirewound
• Material: ABS
• Measuring Medium: Temperature Humidity
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• Measuring Elements: Temperature Humidity CO2 Illuminance
• Wire Length: 3m
• Transport Package: Box
• Specification: 18*20*15cm
• Trademark: BGT
• Origin: China
• HS Code: 9027809990
• Production Capacity: 1000pieces/Month

Product Description

Product Description

BGT-AWS(Y3) wall-mounted multi-in-one sensor is an integrated sensor for measuring illumination, temperature, humidity, CO2 and other environmental elements. The sensor adopts a high protection class housing, IP65 protection class, rain and snow resistance and good air permeability. The products adopt industrial grade microprocessor chip imported from the United States and high-precision temperature and humidity chip imported from Switzerland to ensure excellent reliability, high-precision and interchangeability. Through RS485/RS232 output interface and standard Modbus protocol, the sensor can be easily connected with other acquisition equipment and obtain data. At the same time, the equipment can also output up to four analog signals (current and voltage output). Digital signal output using standard Modbus or ASCII protocol, support secondary development, stable and reliable, easy to install.

1.According to actual need to choose any monitoring elements: wind speed and direction, temperature, humidity, air pressure, rainfall/light/solar radiation;
2. The cost is low, suitable for grid points;
3. The machine power consumption is low, only 0.2 W, especially suitable for occasions of high power consumption requirements;

4. Smal size, modular design to facilitate integration and flexible layout;
5.High-efficiency filter algorithm, in view of the rain and fog weather special compensation technology, to ensure the stability and consistency of the data;
6.Each weather instrument before delivery,have been test, to ensure that the environmental data meet the national standards;
7.Wide environmental adaptability, Product development after strict high and low temperature, waterproof, salt spray and other environmental tests.Ultrasonic probe in the case of no heating, at -40°C low temperature environment, the equipment can still work normally.

Paramater
 

Measuring elements	Range		Accuracy	Resolution		Power consumption
Illumination	0~200000Lux ;0~65535Lux		±4%	1 Lux		0.1mW 0.4mW
Air Temperature	-20~50ºC(Analog signal output) - 40 ~ 100 ºC(Digital signal output)		±0.3ºC(Standard configuration) ±0.2ºC(High precision	0.1ºC		1mW
Atmospheric Humidity	0~100%RH		±5%RH(standard) ±3%RH(high precision)	0.1%RH		1mW
Dew Temperature	-20~60ºC		±2.0ºC	0.1ºC		0.1mW
Barometric Pressure	300~1100hPa		±1 hPa(25ºC)	0.1 hPa		1mW
CO2	0~5000ppm(standard) 0-10000ppm(Customized)		±(50ppm+5%)	1ppm		85mW
Power supply mode	DC5V DC9-30V Others
Output type	4-20mA 0-20mA 0-5V 0-10V 0-2.5V 1-5V
	RS485(Modbus-RTU);RS232(Modbus-RTU);RS485(ASCII private protocol) ;RS232(ASCII private protocol)
Cable length	Standard 2 m Others
Probe type	Built-in	Built-in conventional probe	Suitable for most occasions, waterproof and not dustproof
		Built-in PE probe	Dew proof, waterproof and dustproof
		Built-in metal probe	For high dust environment, waterproof and dustproof, high sensitivity
	External	External conventional probe	Suitable for most occasions, waterproof and not dustproof
		External PE probe	Dew proof, waterproof and dustproof
		External metal probe	For high dust environment, waterproof and dustproof, high sensitivity, high temperature
		External 4-minute thread probe	Used to measure the environment in containers with the same thread
Load capacity	Ohm (12V power supply)		Protection class		IP65
Operating environment	-40ºC~+75ºC		Product net weight
Shipping list	1 copy of product certificate One copy of product manual and installation accessories 1 wall-mounted multi-in-one sensor

Application
It is suitable for many fields such as agricultural meteorology, smart street lights, environmental monitoring of scenic spots, and meteorological monitoring of highways.

                                         

Certifications

 

Packaging & Shipping

FAQ

Q1: Are you trading company or manufacturer?
A: BGT Technology (Beijing) Co., Ltd. is a trading company 100% holding by Beijing Guoxinhuayuan Technology Co., Ltd. Beijing Guoxinhuayuan Technology Co., Ltd is manufacturer for emergency solutions and producs.
Q2. Can I have a free sample for testing ?
A: Sample order is acceptable, but need you to pay for the product cost and freight .
Q3. What about the lead time?
A: Sample needs 4-5 working days after receiving your payment, mass production needs extra 4-5 working days.
Q4: Is it OK to print my logo on the products?
A: Yes, we support OEM/ODM service.
Q5: Do you offer guarantee for the products?
A:Yes, we offer 1 year warranty to our products.
Q6: Can I visit your company?
A: Yes, warmly welcome to visit our company.
Q7. Do you have certifications?
A: Yes, we have ISO9001, ISO 14001, OHSAS18001, CE, etc.
Q8: How is the quality of your goods?
A: We make a commitment to offer products with good apperance and nice quality to customers. If there is some questions for the product, we have after-sale team to serve you. And we offer 1 year warranty