Bgt Wireless IoT Low Power Supply with Battery Lorawan Soil Temperature Moisture Ec Sensor for Agriculture Solution

• Customization: Available
• Installation Type: Surface or Buried Installation
• Sensing Type: Sense
• Model NO.: BGT-SEC(GW100)
• Contact: Contact
• Output Signal Type: RS485 Modbus ,Voltage,SDI12
• Production Process: Injection
• Material: Plastic+Stainless Steel
• Measuring Medium: Soil
• IP Rating: IP68
• Certification: CE
• Customized: Customized
• Name: Lorawan Soil Sensor
• Power Supply: Built-in Battery, 2.5V ~ 3.6V
• IP Grade: IP66
• Operating Temperature: -40 ~ 85°c
• Transport Package: Carton Package
• Trademark: BGT
• Origin: China
• Production Capacity: 1000/Moth
• Package Size: 30.00cm * 30.00cm * 25.00cm
• Package Gross Weight: 2.000kg

Product Description

 

Product Description

The BGT-SEC(GW100) is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.
It detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the value via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in BGT-SEC(GW100) allows device to send data and reach extremely long ranges
at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst
minimizing current consumption.
BGT-SEC(GW100) supports BLE configure and wireless OTA update which make user easy to use.
BGT-SEC(GW100) is powered by 8500mAh Li-SOCI2 battery or solar powered + Li-ion battery it is designed for
long term use up to 5 years.
Each BGT-SEC(GW100) is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local
LoRaWAN server and it will auto connect after power on

The BGT-GW100 is a RS485 / UART to LoRaWAN Converter for Internet of Things solutions. Usercan connect RS485 or UART sensor to BGT-SN100 converter, and configure RS485-LB/LS to periodically read sensor data and upload via LoRaWAN network to IoT server.BGT-GW100 can interface to RS485 sensor, 3.3v/5v UART sensor or interrupt sensor. BGT-GW100 provides a3.3v output and a 5v output to power external sensors. Both output voltages are controllable to minimize the totalsystem power consumption.BGT-GW100 is IP67 waterproof and powered by 8500mAh Li-SOCI2 battery or solar powered + Li-ion battery, it is designed for long term use for several years.

Features

Working Voltage: DC2-5V; DC5-24V
Quiescent Current: peak value <30mA,Average<10mA
Response Time: <1s
Measured Stability Time: 2s
Output: Digital RS485/RS232 Modbus
Protection Level: IP68
Working Temperature range: -40ºC~85ºC
Measurement Area: center on the central probe in a cylinder with diameter 7cm and 10cm height
 

Product Parameters

Model:	BGT-GW100
Technology:	LoRaWAN
Operating Temperature:	-40.00ºC~85.00ºC
Frequency:	CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
Power Supply:	8500mA Li-SOCI2 battery
Features:	* LoRaWAN v1.0.3 Class A * Ultra low power consumption * RS485 interface for RS485/ Modbus sensor * 3.3 / 5v UART interface for sensor * High capacity 8500 mAh Li-SOCI2 battery * AT Commands to change parameters * Uplink on periodically or Interrupt * Downlink to change configure
Ingress Protection:	IP66 Waterproof Enclosure

 

  

Soil Moisture:
* Range: 0-100.00 V/V %
* Resolution: 0.01 V/V %
* Accuracy: ±3% (0-53%)V/V %, ±5% (>53%) V/V %
* Measure Method: FDR , with temperature &EC compensate
Soil Temperature
* Range: -40.00ºC~85.00ºC
* Resolution: 0.01ºC
* Accuracy: -10ºC~50ºC:<0.3ºC ,All other: <0.6ºC
* Measure Method: RTD, and calibrate
Soil Conductivity
* Range: 0-20000 uS/cm(25ºC)(0-20.0EC)
* Resolution: 1 uS/cm
* Accuracy: 2%FS
* Measure Method: Conductivity , with temperature compensate

 

Installation Instructions

Company Profile

Packaging & Shipping